Velours wall sticker Masallah with 802 pieces of crystal stone

Velours wall sticker Masallah with 802 pieces of crystal stone
Size: 62X47 cm

1. The product is glued to the wall by hand so that the remaining air can escape.
2. Although this product does not damage the wall paint,
Depending on the paint application, some paints may be damaged in certain spots. Therefore, the sticker should be tested on an invisible spot on the wall.
3. Care must be taken to ensure that the product does not stick together.
4. You can dust the product, but it is not resistant to strong wiping because it contains just enough adhesive to be removed without leaving marks on the wall. For this reason, if force is used, it may peel off the wall

PRODUCT CLEANING
1. After the product is attached to the wall, dust can be removed with a cloth.
2. Do not expose the product to water. "Acetone, alcohol, thinner, etc."
Caution: Solvents can damage the product. Do not use abrasive surface cleaners for cleaning. The product is not washed and no dry cleaning is carried out.

HOW IS COART USED?
1 Please first clean the surface where Coart is to be stuck on.
2 Remove the protective film from the adhesive surface.
3 Stick it to the previously cleaned surface.
4 Press with the palm of your hand to ensure that no air bubbles form.
5 Put the pieces together and complete the pattern.

DO YOU WANT TO GET A COAT OF ARMS?
1 The entire process of cleaning is carried out by hand.
2 maps indicate that there is no
3 Please note that some parts of the window are not level.
4 Remove all traces of dust from the air and immerse yourself in the atmosphere.
5 Paragraphs of the invoice must be sent to the recipient.

HOW IS COART APPLIED?
1 Clean the surface where Coart will be adhered.
2 Remove stickers from the surface.
3 Adhere it onto the surface which has been previously cleaned.
4 Press your hand to prevent air bubbles from forming.
5 Assemble the parts to complete the pattern.


HOW IS THIS COART APPLIED?
1 Clean the surface where the carpet is positioned
2 Remove the stickers from the surface
3 Scrub the surface thoroughly
4 Apply by hand to avoid air bubbles
5 Unify the parts to complete the pattern

HOW IS THIS COART APPLIED?
1 Clean the surface where the carpet is attached
2 Remove the stickers from the surface
3 Attach to the previously clean surface
4 First to avoid the formation of the darling
5 Unite the parts to complete the model

HOW TO APPLY COART?
1 Clean the surface using a clean sponge
2 Remove the first layer of the sticker
3 Collet the lid onto the surface and place it
4 To help your child to grip it with light pressure to prevent the formation of bubbles
5 Process of the mme with the other elements of the sticker